AP6762 Outdoor Wireless AP
grade wireless access point (2.4GHz 2*2 ax and 5GHz-1 2*2 ax ). Its total data rate can reach 3Gbps. It complies with the requirements of IP67. By seamlessly working with AC (CAM), it can build all kinds of customized, enterprise-grade wireless networks through an approach which combines simplicity, scalability, extensibility, reliability, performance and security. it is suitable for ISPs, campus, parks, commercial streets, etc.
- Highlights
Wi-Fi 6 (802.11ax)
Supports 1024QAM modulation and 2×2MIMO technology, the data rate of 5GHz air interface is up to 2.4Gbps, and the whole device data rate is 3Gbps. Supports OFDMA scheduling, enables multiple users to receive and send data at the same time, reducing the delay and improving the performance.
Load Balancing and Band Steering
Supports load balancing based on the number of access users, traffic, and frequency bands, and the system automatically guides users to the 5GHz frequency band by default, which maximizes network capacity and ensures the best access experience for users.
Zero Touch Provisioning
Fully supports plug-and-play deployment. No matter the network environment is complex or not, whether the device is deployed in the public or private network, as long as the device can access the AC, the system can automatically complete the configuration and the network is up running without touch.
Easy Maintenance
Supports real-time monitoring AP system status and sending alarms automatically when detecting faults; supports automatic software update in the batch mode based on the policies of AP location, model, version, and the update time.
Network Security
Supports L4 stateful firewall, role-based NAC (network access control), white/blacklists, URL logging, and full 802.11i security standard.
Auto Power and Auto Channel
Supports automatic Tx power adjustment to automatically detect and compensate the signal coverage; supports automatic/manual adjustment of channels to ensure that the AP is in the best radio frequency environment and provide users with the best QOS.
- Hardware Specifications
|
Dimensions |
245mm(H) × 200mm(W) × 90mm(D) |
|
Ports |
1 × 10/100/1000Mbps Ethernet port (PoE) |
|
1 × 10/100/1000/2500Mbps SFP port |
|
|
4 N-type RF ports (2.4GHz×2 ，5GHz×2), integrated antenna version no RF ports |
|
|
Memory |
DDR3 512MB |
|
Flash |
32MB SPI 128MB NAND Flash |
|
CPU |
Qualcomm IPQ5018 |
|
RF |
2.4GHz 802.11ax 2.4GHz 2x2 |
|
5GHz-1 802.11ax 5GHz 2x2 |
|
|
Max TX |
2.4G ：22dBm; 5GHz Radio 1 ：22dBm (Subject to local regulations) |
|
Antenna Index |
2.4GHz Max Gain: ≥11 dBi@ 2.4~2.4835GHz, Azimuth angle is 61 degrees and the elevation angle is 30 degrees. |
|
5.15~5.85GHz Max Gain: ≥13 dBi@ 5.15~5.85GHz, Azimuth angle 78 degrees, elevation 30 degree. |
|
|
Power Supply |
PoE power supply |
|
LED Description |
5× LED (Power,LAN1,LAN2,2.4G,5G) |
|
Support Standard |
IEEE802.11a/b/g/n/ac/ax |
|
2.4GHz and 5GHz |
|
|
Installation |
Pole or Wall Mount |
|
Working Environment |
Temp: -40°C to +65°C |
|
Humidity: 0% to 95% non-condensing |
|
|
Protection: IP67 |
|
|
Lightning Protection: 10/700 combined wave surge test, common mode 6KV, differential mode 2KV |
|
|
Electrostatic Protection: contact discharge 6KV, air discharge 8KV |
- Software Specification
|
WLAN |
Comply with IEEE801.11a/b/g/n/ac/ax standard |
|
Support dynamic rate adjustment |
|
|
Support 1024QAM modulation |
|
|
Support 802.11ax standard, |
|
|
Support automatic channel scanning and manual selection |
|
|
Support dynamic power adjustment and manual power adjustment |
|
|
Support fast roaming protocol (802.11r 802.11k) |
|
|
Support Short GI in 20M, 40M, 80M 160M mode |
|
|
Support OFDMA scheduling and other features, |
|
|
Support WMM |
|
|
Support band steering |
|
|
Support load balancing based on AP traffic, frequency band and number of users |
|
|
Security |
Support Open-system authentication method |
|
Support WEP authentication/encryption method |
|
|
Support WPA/WPA2-PSK authentication/encryption method |
|
|
Support WPA/WPA2-802.1X authentication/encryption method |
|
|
Support WPA-WPA2 hybrid authentication method |
|
|
Support WPAI authentication/encryption method |
|
|
Support 802.1X, Mac, portal, SMS + non-perceptual authentication methods |
|
|
Network |
Support local forwarding and centralized forwarding data traffic |
|
Support user access isolation under the same SSID |
|
|
Support role-based NAC (network access control) and ACL |
|
|
Support bandwidth control based on each user |
|
|
Support speed limit based on WAN port bandwidth |
|
|
Support network detection based on Ping and Arp |
|
|
Supports witching AP to the stand alone mode when the connection between AP and AC is lost to make sure the data traffic is not interrupted |
|
|
Support AC active/standby deployment |
|
|
Support DHCP Server |
|
|
Support static IP/DHCP/PPOE |
|
|
Support IPV6 function |
|
|
Support Soft-GRE function |
|
|
Support VPDN (virtual private dialup network) function |
|
|
Management& Maintenance |
Support AP and AC deployed in the cross-Internet mode |
|
Support Web UI management (HTTPS) |
|
|
Support CLI-based management |
|
|
Support SSH-based management |
|
|
Support updating AP’s local credential remotely |
|
|
Support Zero Touch Provisioning |
|
|
Support LED light control |
|
|
Support scheduled restart of AP |
|
|
Support batch modification of AP's AC access address |
|
|
Support software update in the batch mode based on the policies of AP location, model, version and update time |
